Product Features Datasheet ■ IEEE 802.3 10BASE-T/100BASE-TX compliant physical layer interface ■ IEEE 802.3u Auto-Negotiation support ■ Digital Adaptive Equalization control ■ Link status interrupt capability ■ XOR tree mode support ■ 3-port LED support (speed, link and activity) ■ 10BASE-T auto-polarity correction ■ Alert on LAN functionality ■ Diagnostic loopback mode ■ 1:1 transmit transformer ratio support ■ Low power (less than 300 mW in active transmit mode) ■ Reduced power in “unplugged mode” (less than 50 mW) ■ Automatic detection of “unplugged mode” ■ 3.3 V device 1 ■ Lead-free 64-pin Plastic Ball Grid Array Package for both leaded and lead-free designs. (Devices that are lead-free are marked with a circled “e1” and have the product code prefix: PCxxxxxx). 1 This device is lead-free. That is, lead has not been intentionally added, but lead may still exist as an impurity at <1000 ppm. The Material Declaration Data Sheet, which includes lead impurity levels and the concentration of other Restriction on Hazardous Substances (RoHS)- banned materials, is available at: ftp://download.intel.com/design/packtech/material_content_IC_Package.pdf#pagemode=bookmarks In addition, this device has been tested and conforms to the same parametric specifications as previous versions of the device. For more information regarding lead-free products from Intel Corporation, contact your Intel Field Sales representative. Revision 2.0 September 2005 Revision History Revision 1.0 1.4 1.5 1.6 2.0 Revision Date Description August 2000 Initial release (Intel Secret). May 2001 Finialized signal descriptions and pinouts. October 2001 Changed document status to Intel Confidential - Controlled Access. December 2003 Removed confidential status. September 2005 Updated or new revision information includes: • Lead-free information. • Product codes. • Bias reference resistor values (RBIAS 10 and RBIAS 100). • Crystal input/output clock values. • Signal termination section. Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel® products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The 82562EP PLC may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an ordering number and are referenced in Read the full 82562EP 10/100 Mbps Platform LAN Connect (PLC) Networking Silicon.