INTEL DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THIS PATCH WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THIS PATCH WILL BE UNINTERRUPTED OR ERROR-FREE. //**************************************************************** quartus-21.4-0.84fw-readme.txt Readme file for Intel(R) Quartus(R) Prime 21.4 Patch 0.84fw Copyright (C) Intel Corporation 2019 All right reserved. Patch created on Feb. 22, 2023, 11:44 p.m. Patch Case#: 15012244374 Patches included: 0.11fw,0.37fw,0.40fw,0.49,0.57fw,0.59fw,0.61fw,0.75fw,0.80fw,0.83fw Patches conflicted: //**************************************************************** Description: This patch fixes an issue where the Remote System Update (RSU) fails to recover after using an incorrect device application image. [Bug/feature tracking number: 15012244374] This patch also includes the fixes below. Patch# 0.11fw: This patch addresses a problem which can cause boot failures for Intel(R) Stratix(R) 10 SoC Hard Processor System Remote System Update (RSU) Combined Application Images after a Linux reboot command is issued from Linux-socfpga running on the Intel(R) Stratix(R) 10 HPS. This Patch can be applied to Intel(R) Quartus(R) Prime Pro version 21.4, and Intel(R) Quartus(R) Prime Pro Standalone Programmer installations. After installing this patch, - RSU Application / Combined Application Images must be re-created using the Quartus Programming file generator tool (quartus_pfg) - A re-compile of the Intel Quartus Prime Pro design is not required Patch# 0.37fw: This patch include the below items : a) CLEAR_FAULT after getting STATUS_BYTE !=0 b) EMQ reporting the correct SEU error caused by VID c) Overwrite VR UV/OV limit for ED8401 during bitstream generation if INI setting is present: : bitasm_enable_over_voltage_limit_overwrite=4W4BETXI@on d) This patch addresses a problem which can cause boot failures for Intel(R) Agilex (TM) SoC Hard Processor System Remote System Update (RSU) Combined Application Images after a Linux reboot command is issued from Linux-socfpga running on the Intel(R) Agilex(TM) HPS. Please include the INI in the quartus.ini to overwrite the VR UV/OV limit for ED8401 For item d: - RSU Application / Combined Application Images must be re-created using the Quartus Programming file generator tool (quartus_pfg) - A re-compile of the Intel Quartus Prime Pro design is not required Patch# 0.40fw: This patch is to enhance the PR configuration time for Agilex devices. Patch# 0.49: None Patch# 0.57fw: This patch fixes this reported issue: During Agilex 2x8 bifurcation mode, refclk1 not preset cause PCIe0 can not be identified after reboot Patch# 0.59fw: This patch fixes the M20K functional error in the Partial Reconfiguration Region after partial reconfiguration on Agilex devices. The affected M20K are not used in the design before partial reconfiguration. Patch# 0.61fw: This patch includes the fix for the following issue: HPS boot instability or unexpected functional failures due to memory corruption because of erroneously disabled HPS RAM repair functionality. Patch# 0.75fw: This patch includes the fixes for below issues: 1. SHA mismatch errors and AVSTx8 configuration failures when using an encrypted bitstream. [Bug/feature tracking number: 16017496962] 2. Encryption and trng failures on Diamond Mesa [Bug/feature tracking number: 22013769324] 3. Quartus programmer support to load provisioning firmware via AVSTx8 using PFL-II IP [Bug/feature tracking number: 16015175363] 4. Internal error where a complex design's SMH contain critical and non critical bit in every region. [Bug/feature tracking number: 14015577618] 5. Internal error caused by changing a existing device on a JTAG chain with different device family and subsequently start the device programming. [Bug/feature tracking number: 14016666941] Patch# 0.80fw: Fixes a bug which can cause random Partial Reconfiguration (PR) failure after PR interruption by resetting LSM after the interruption. You must install 21.4 Patch 0.72 before installing this patch. Patch# 0.83fw: This patch includes the fix for the following issue: [FM7] RSU failed to recover after update application image for wrong device [Bug/feature tracking number: 15012244374] Caution - You must either have previously installed the Intel(R) Quartus(R) Prime 21.4 software or must install the Intel(R) Quartus(R) Prime 21.4 software before installing this patch. Otherwise, the patch will not be installed correctly and the Intel(R) Quartus(R) Prime software will not run properly. Note: - means this patch includes those patches. If you already installed those patches, you can safely install this new patch on top. - means this patch conflicts with those patches. If you have any of those patches installed, don't install this patch. Contact Intel for further support.