문서 ID: 000075059 콘텐츠 형태: 문제 해결 마지막 검토일: 2012-09-11

Quartus II 소프트웨어 버전 11.0이 TSE(Triple Speed Ethernet) IP 코어를 컴파일할 때 다음과 같은 중요한 경고 메시지를 제공하는 이유는 무엇입니까?

환경

  • 이더넷
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    설명

    다음 TSE IP 코어 변형 중 하나를 선택하면 다음과 같습니다.

    1. 1000BASE-X/SGMII PCS가 있는 10/100/1000Mb 이더넷 MAC

    2. 1000BASE-X/SGMII PCS

    중요 경고:

    중요 경고: RAM 원자의 "mixed_port_feed_through_mode" 매개변수 altera_tse_mac_pcs_pma_gige:altera_tse_mac_pcs_pma_gige_inst|altera_tse_mac_pcs_pma_strx_gx_ena:altera_tse_mac_pcs_pma_strx_gx_ena_inst|altera_tse_top_1000_base_x_strx_gx:top_1000_base_x_strx_gx_inst|altera_tse_top_sgmii_strx_gx: U_SGMII|altera_tse_top_rx_converter:U_RXCV|altera_tse_a_fifo_24:U_DSW|altera_tse_sdpm_altsyncram:U_RAM|altsyncram:altsyncram_component|altsyncram_q2e1:auto_generated|ram_block1a8 다른 읽기 및 쓰기 클럭을 사용하는 경우 "old" 값을 가질 수 없습니다.


    중요 경고: RAM 원자의 "mixed_port_feed_through_mode" 매개변수 altera_tse_mac_pcs_pma_gige:altera_tse_mac_pcs_pma_gige_inst|altera_tse_mac_pcs_pma_strx_gx_ena:altera_tse_mac_pcs_pma_strx_gx_ena_inst|altera_tse_top_1000_base_x_strx_gx:top_1000_base_x_strx_gx_inst|altera_tse_top_sgmii_strx_gx: U_SGMII|altera_tse_top_rx_converter:U_RXCV|altera_tse_a_fifo_24:U_DSW|altera_tse_sdpm_altsyncram:U_RAM|altsyncram:altsyncram_component|altsyncram_q2e1:auto_generated|ram_block1a7 다른 읽기 및 쓰기 클럭을 사용하는 경우 "old" 값을 가질 수 없습니다.

    또는 MAC 옵션 탭에서 다음 옵션을 사용할 수 있습니다.

    1. MII/GMII/RGMII에서 로컬 루프백 활성화

    중요 경고:

    중요 경고: RAM 원자의 "mixed_port_feed_through_mode" 매개변수 altera_tse_mac:altera_tse_mac_inst|altera_tse_top_gen_host:top_gen_host_inst|altera_tse_top_w_fifo_10_100_1000:U_MAC_TOP|altera_tse_loopback_ff:U_LBFF|altera_tse_a_fifo_24:U_LBFF|altera_tse_sdpm_altsyncram:U_RAM|altsyncram: altsyncram_component|altsyncram_o4e1:auto_generated|ram_block1a8은(는) 다른 읽기 및 쓰기 클럭을 사용할 때 "old" 값을 가질 수 없습니다.


    중요 경고: RAM 원자의 "mixed_port_feed_through_mode" 매개변수altera_tse_mac:altera_tse_mac_inst|altera_tse_top_gen_host:top_gen_host_inst|altera_tse_top_w_fifo_10_100_1000:U_MAC_TOP|altera_tse_loopback_ff:U_LBFF|altera_tse_a_fifo_24:U_LBFF|altera_tse_sdpm_altsyncram:U_RAM|
    altsyncram:altsyncram_component|altsyncram_o4e1:auto_generated|ram_block1a7는 다른 읽기 및 쓰기 클럭을 사용할 때 "old" 값을 가질 수 없습니다.

    솔루션:

    이 중요한 경고는 Quartus® II 소프트웨어 버전 11.0에서 무시해도 됩니다. 이 중요한 경고는 3배속 이더넷 IP 코어의 기능에 영향을 미치지 않습니다. 이 중요한 경고가 발생하지 않도록 하려면 위에 표시된 TSE 코어 변형 및 MAC 옵션을 사용하지 마십시오.

    이 중요한 경고는 향후 릴리스에서 수정될 예정입니다.


    관련 제품

    이 문서는 다음 항목에 적용됩니다. 1 제품

    인텔® 프로그래밍 가능 장치

    이 페이지의 콘텐츠는 원본 영어 콘텐츠에 대한 사람 번역 및 컴퓨터 번역의 조합으로 완성되었습니다. 이 콘텐츠는 편의와 일반적인 정보 제공을 위해서만 제공되었으며, 완전하거나 정확한 것으로 간주되어선 안 됩니다. 이 페이지의 영어 버전과 번역 간 모순이 있는 경우, 영어 버전이 우선적으로 적용됩니다. 이 페이지의 영어 버전을 확인하십시오.